Sign In / Register

Parameter
Resolution: 128*160
Drive IC:     ST7735R    

Characteristic
Module is with voltage regulator IC support 3.2V/5V power supply
With SD card, it can do digital photo frame and other experimental
Module is reserved for Nokia 3310/5110 interface, support 1602 interface, used in line with straight directly

Simplified wiring for IO: (minimum only 3 IO)
1.RST-- microcontroller reset signal directly to the end of the IO Province
2.D/C-- connected to a low level, the chip select effective long-term is the IO Province
3.D/C-- is connected to the IO control register selection
4.DIN-- is connected to the IO control data transmission
5.CLK-- is connected to the IO control of SPI bus
6.BL-- is connected with a high level of 3.3V backlight brightness is the IO Province

Standard connection IO: (6 IO)
1.RST-- connected to the IO control LCD reset
2.CE-- connected to the IO control chip select
3.D/C-- connected to the IO control register selection
4.DIN-- connected to the IO control data transmission
5.CLK-- connected to the IO control SPI bus
6.BL-- connected to the IO control or PWM control the brightness of backlight brightness

Information
1 LCDl specification
2 LCD module schematic
3 LCD screen Protel99SE package library
4.C51 test source code (scraper, English, pictures, support the software and hardware of SPI)
5.STM32 test source code (scraper, English Chinese display, display, image display, support the software and hardware of SPI)
6.For Arduino source code (GUI test, powerful)
7 Provide the underlying driver of professional and technical support