Sign In / Register

Parameters

Screen Size: 5.0 inch (diagonal)

Diagonal Ratio: 4:3

Widescreen Support: No

Backlight: LED

Resolution: 640(RGB)*480

Brightness: 200cd/m2

LED Life Time: 20000hrs (Min.)

View Angle: 50/70/70/70

Input / Output Interface: Video (CVBS)

                                    D-Sub 15 pin female for VGA

Active Area: 101.568(W)x76.176(H) mm

LCD Screen Size: 117.65(W)x88.43(H)x5.7(D) mm

Drive Plate Size: 102.0(W)x50.0(H)x7.9(D) mm

Dot Pitch: 0.0529*0.1587 mm

Working Voltage: DC 12.0V (Typ.) (Min.9.0, Max.15.0)

System: PAL.NTSC (automatic identifying and converting)

Working Temperature Range: -20 ~70 degree

Storage Temperature Range: -30 ~80 degree

Start time: 1.8s

Power consumption: 3.0W

Relative humidity: 5~95%RH

Input current: DC 120±20

Feature

1 The product contains driver board, 5.0 inch TFT LCD panel, key board, video line and VGA line

3 DC converter, LED backlight driver, video and VGA decoder three in one

4 NTSC / PAL automatic modulation recognition and conversion

5 Operating voltage +12.0 V (Min9.0V, Max15.0V)

6 Support CVBS/VIDEO and VGA signal input

7 OSD menu control: allows to adjust the screen brightness, contrast, RGB automatic color balance, reverse, the horizontal position, vertical position

8 This product conforms to the standard RoHS

Application

Portable products

Hand-held instrument

Safety equipment

Office electronic

Industrial equipment

Instrument display

Please see following important safety instructions

1. The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack,the diameter of the jack is 5.5 mm.

2. Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack.

3. Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.

4. When assembling it, please use a suitable force; don’t distort the PCB and other components