Sign In / Register

Parameters

Screen Size: 7.0 inch (diagonal)

Diagonal Ratio: 16:9

Backlight: LED

Resolution: 800(RGB)*480

Brightness: 250cd/m2

LED Life Time: 30000hrs (Min.)

View Angle: 50/70/70/70

Input / Output Interface: Video (CVBS)

                                    D-Sub 15 pin female for VGA

Active Area: 154.08(W)x85.92(H) mm

LCD Screen Size: 164.9(W)x100.0(H)x5.8(D) mm

Drive Plate Size: 102.0(W)x50.0(H)x7.9(D) mm

Working Voltage: DC 12.0V (Typ.) (Min.9.0, Max.15.0)

System: PAL.NTSC (automatic identifying and converting)

Working Temperature Range: -20 ~70 degree

Storage Temperature Range: -30 ~80 degree

Start time: 2.0s

Power consumption: 2.88W

Relative humidity: 5~95%RH

Input current: DC240±20

Feature

1 The product contains AD driver board, 7.0 inch TFT LCD digital panel, key board, power line, video line and VGA line

3 DC converter, LED backlight driver, video and VGA decoder three in one

4 NTSC / PAL automatic modulation recognition and conversion

5 Operating voltage +12.0 V (Min9.0V, Max15.0V)

6 Support \VIDEO and VGA signal input

7 OSD menu control: allows to adjust the screen brightness, contrast, RGB automatic color balance, reverse, the horizontal position, vertical position

8 This product conforms to the standard RoHS

Application

Portable products

Hand-held instrument

Safety equipment

Office electronic products

Industrial equipment

Meter display

Please see following important safety instructions

1. The nominal voltage of DC input to the A/D board is 12V, The size of DC current depends on the TFT LCD, audio amplifier, etc. Please note that your AC/DC adapter's output plug need to match the DC input jack,the diameter of the jack is 5.5 mm.

2. Before connecting these input/output ports, Video port, it is strongly recommended that your turn off the A/D board and remove the DC 12V plug from the DC input jack.

3. Don’t put the A/D board into an airtight package. When it works, it will produce a certain heat.

4. When assembling it, please use a suitable force; don’t distort the PCB and other components